After creating the Bedford Hills – Katonah Phase II Sewer District by referendum in October 2020, the Town of Bedford has designed and is currently obtaining regulatory approval for a sewer system to serve 89 residential properties primarily along Bedford, Edgemont and Valley Roads in Katonah; thirteen commercial parcels along Railroad Avenue in Bedford Hills; and the apartments and condominiums at Bedford Lake in Bedford Hills. 

The Phase II project will eliminate existing individual on-site septic systems and cesspools. The effluent from these areas will be sent to pump stations constructed as part of the Phase I project, and will be treated at the Town’s wastewater plant.

Construction of the Phase II Sewer District will include approximately 3,300 linear feet of gravity sewer main, 4,000 linear feet of low pressure sewer main, and 5,700 linear feet of force main, all installed primarily within existing roadways. The project will also include construction of a new wastewater pump station to replace the Bedford Lake WWTP, which will be decommissioned.

Total wastewater generated from the Phase II Sewer District is estimated to be 60,000 gallons per day. The Town’s wastewater plant currently has a capacity of 500,000 gallons per day. Currently all this capacity has been allocated to Phase I Sewer District customers, so an increase in capacity will be required. This increase in capacity requires a variance from New York City Department of Environmental Protection (NYCDEP), which has been obtained, as well as a permit modification from New York State Department of Environmental Conservation (NYSDEC), which is currently under review. Proposed upgrades include increases in equalization tank and pumping capacity at the plant.

The total estimated project cost is $13.1 million. Funding for the project is proposed to be a combination of NYC funding and Phase II District Bonding. The bond issue is proposed to be $175,000, with the remainder of the funds coming from NYC.

Collection system and plant expansion engineering design was completed in fall 2021 on schedule. Regulatory review is taking a bit longer than anticipated. The project is scheduled to be advertised for bid in mid to late 2022 and for construction to begin in either late 2022 or early 2023, assuming bids are within the project budget. Construction will take approximately 15 months.

Traducir al español

Stay Informed

Join our mailing list and receive newsletters, reports and emergency updates.

You have Successfully Subscribed!